How to Make a J Feeder and Hay Rack for your Rabbits or Chickens

This post was most recently updated on July 27th, 2021

Keeping rabbits in a colony is a fantastic, natural way of raising rabbits. The only problem I have really encountered is their love of tipping their bowls over.

Please read: This information is provided for educational purposes only and is not intended to treat, diagnose or prevent any disease. We encourage you to make your own health care decisions in partnership with a qualified health care professional.

This post contains affiliate links, this means at no extra cost to you, we make a commission from sales. Please read our Disclosure Statement

The solution I have found is to make a J feeder and to make a hay rack for the rabbits. I also made another bin dispenser for the rabbit’s alfalfa chaff (chopped up hay).

Because we are trying to be self sufficient and to build SHTF resilient systems, we feed our rabbits a natural diet and that involves quite a lot of grain. We do not feed pellets, but these J feeders would work really well for pellets as well.

I made two J feeders – a single ended J feeder and a double ended one.

Ideally I wanted to make them out of the stormwater/sewer pipe which is nice and large. But it is also well outside of our price range, so I have used 90mm (3 1/2in) downpipe which is nice and cheap.

I made the J feeders about 1.2m (4ft) tall, and they hold 1 big bucket of grain each.

How to Make a J Feeder

We had some down pipe out in the paddock that we managed to get for free from a demolition house to make our J feeder with. But you can buy it at the hardware store in various lengths for fairly cheap.

Want to know all about raising rabbits in a colony?

Check out our very own book here:

Available on Kindle and in paperback or from our store 

If your budget extends to the larger 6in pipe, go for it, as then your J feeder should almost hold half a bag of grain each.

To make a J feeder you need 1-1.2m of pipe. If you have a colony of rabbits or several chickens, you will need to make more than one feeder.

For each single end J feeder you will need 1x 90 degree bend and 1 x 45 degree bend.

building a j feeder

For a double sided one you need 1x T end and 2 x 45 degree bends.

building a j feeder

Make sure that the ends of your fittings flare so they will fit around your pipe. I forgot to do this, and subsequently one of my J feeders is taped together. Not ideal, but it works.

If you have a long piece of pipe, cut it to length with a hacksaw.

make a j feeder

Do a dry run and check all your parts fit together.  Then pull them apart and glue them with plumbers pipe glue.

make a j feeder

To attach in the shed you can either drill a hole in the top-back-edge and screw it to a post/wall, or you can use metal strapping tape.

make a j feeder

How to Make a Hay Rack

Our rabbits were just wasting most of their hay, now that it is in it’s nifty hay rack we go through half as much!

To make a hay rack I used a small pellet that I then cut down further so that it fit the little piece of wire mesh that I had.

make a hay rack

 

Using small nail-in staples I attached the piece of wire mesh to the pallet.

I folded the wire around the sides of the pallet and secured it there too.

You could use a staple gun, but I suspect that would be too easy to pull out/come loose.

You need to make sure that the mesh holes are at least 50mm(2in) to allow the rabbits to pull the hay out. Anything much bigger than 3 inches and you may find a rabbit will climb in and make itself at home in there.

Attach the hay rack securely to the wall so it doesn’t fall and squish anyone.

hay feeder

Make an Automatic Bin Feeder

The alfalfa chaff we feed the rabbits is a real favorite of theirs, but they always knock it over and waste it, so this bin feeder has solved that problem. This bin feeder would also work well for grain or pellets.

Using an old rubbish bin that we had (a large bucket would do too) I cut a hole in the front for the chaff to come out. I used a craft knife/boxcutter, please be VERY careful!

DIY bin feeder

Next I cut an ice cream tub to fit as the feed tray. Using silicone as glue I attached it to the bin and let it dry.

**UPDATE** my rabbits ate the ice cream pottle within days. You will need a thicker, harder plastic tray. Or metal. Or wood

I made a simple lid with some pieces of wood left over from the pallet I used for the hay rack.

Once the silicone had set I screwed it to the wall in the rabbit colony and let them have at it.

We waste a lot less feed this way, and it has reduced how much time it takes to feed the rabbits each morning.

My next task is to convert a bucket to a large funnel to make filling the J feeder much easier and to make an automatic watering system.

*Contrary to how it appears – I am not a 2 year old boy. He was a great little helper.

Are you interested in raising meat rabbits as a sustainable meat choice? Check out our book here.

If you like tips on frugal living, self sufficiency and consuming less, sign up to our newsletter below, I would LOVE to have you!

What do you use to feed your rabbits and chickens? Let me know in the comments below!

30 frugal DIY decoration ideas for your homestead this Christmas. CHeck out these beautiful, easy, rustic DIY decoration ideas #christmas #frugalchristmas #christmasideas #piwakawakavalley
large batch gingerbread house recipe NZ promo image
Are you keen to join the uprising of the return to traditional ways of life? These 33 traditional skills will help you on your road to self sufficiency.
This recipe uses natural ingredients to create a waterproof coating on the fabric of choice. You can use it to waterproof canvas clothing, shoes, bags, tents, leather, even fabric tarpaulins and wood!

Please Pin and Share with your Friends!

Do you struggle with spilt rabbit and chicken feed? This j feeder and hay rack will sort it for you! making a j feeder is super easy find out how here. #chickens #rabbits #DIY #feeder

 

Do you need more delicious goodness fresh from the farm?

 

Sign up for our weekly Fresh From the Farm Newsletter

All goodness, no spam.

Get exclusive content, discounts and updates.

Invalid email address
We promise not to spam you. You can unsubscribe at any time.